site logo

Plywood Cold Press

Plywood Cold Press

It’s a necessary equipment for processing plywood, suitable for 3’*7’,4’*8’ panel.

By choosing our pressing production line, the customer could increase the production ,save energy and reduce cost.


The cold press machine is the main equipment during plywood production line, that pre-presses the glued veneer for a short time to make it preliminarily formed, and then sends it to the hot press for pressing. The step helps to make the plywood to a basic thickness in advance, shorten the hot pressing cycle and improve the panel quality.

 

 

The plywood cold press machine comprises a feeding mechanism, a frame, press plates, plunger cylinder, lifting cylinder, hydraulic station etc. The frame part adopts a combined structure, and it is convenient for transportation.

The blank board is transported to the worktable of the cold press after assembly. Start the pump pressure then the cylinder will drop. Start pressure when the movable plate touches the blank board. The time is 20-45 minutes. Then some bonding strength of blank board will appear.

 

Weihai BaiShengYuan இண்டஸ்ட்ரி 1956 முதல் மரவேலை இயந்திர உற்பத்தியாளர்.

ஒட்டு பலகை ஆலை, லாக் டிபார்க்கர், வெனீர் சிங்கிள்-ஸ்பிண்டில் ரோட்டரி லேத், வெனீர் ஸ்பிண்டில்-லெஸ் ரோட்டரி லேத், ஒருங்கிணைந்த ரோட்டரி லேத், லாக் சார்ஜர், லாக் கன்வேயர், வெனீர் கில்லட்டின், ப்ளைவுட் செயல்திறன் ஆகியவற்றை உள்ளடக்கிய நிலையான மற்றும் சிறப்பு ஒட்டு பலகை இயந்திரங்களை BSY தயாரிப்பு வரிசை மையமாகக் கொண்டுள்ளது. பிரஸ், வெனீர் ட்ரையர், ப்ளைவுட் எட்ஜ் டிரிம்மர், ப்ளைவுட் சாண்டர் போன்றவை.

With the support from the Technology Development Center and all the efforts contributed by the engineers, the Group has successfully developed the most advanced plywood production line in China. Such production line has been set up in several countries, including Romania, Turkey, Russia, Indonesia, Malaysia, India, Bangladesh, Chile, Argentia etc.