Plywood Cold Press It’s a necessary equipment for processing plywood, suitable for 3’*7’,4’*8’ panel. By choosing our pressing production line, the customer could increase the production ,save energy and reduce cost.

The cold press machine is the main equipment during plywood production line, that pre-presses the glued veneer for a short time to make it preliminarily formed, and then sends it to the hot press for pressing. The step helps to make the plywood to a basic thickness in advance, shorten the hot pressing cycle and improve the panel quality.

The plywood cold press machine comprises a feeding mechanism, a frame, press plates, plunger cylinder, lifting cylinder, hydraulic station etc. The frame part adopts a combined structure, and it is convenient for transportation.

The blank board is transported to the worktable of the cold press after assembly. Start the pump pressure then the cylinder will drop. Start pressure when the movable plate touches the blank board. The time is 20-45 minutes. Then some bonding strength of blank board will appear.

Weihai BaiShengYuan Industry 1956-cı ildən bəri ağac emalı maşın istehsalçısıdır.

BSY məhsul xətti bir sıra standart və xüsusi kontrplak maşınları üzərində mərkəzləşir ki, bunlara faner zavodu, log qabaran, şponlu tək milli fırlanan torna, şpon milsiz fırlanan torna, kombinə edilmiş dönər dəzgahı, log doldurucu, log konveyer, şpon gilyotin, kontrplak istehsalı daxildir. pres, Şpon qurutma maşını, plywood Edge Trimmer, plywood Sander və s.

With the support from the Technology Development Center and all the efforts contributed by the engineers, the Group has successfully developed the most advanced plywood production line in China. Such production line has been set up in several countries, including Romania, Turkey, Russia, Indonesia, Malaysia, India, Bangladesh, Chile, Argentia etc.