Presse à froid de contreplaqué

Presse à froid de contreplaqué

It’s a necessary equipment for processing plywood, suitable for 3’*7’,4’*8’ panel.

By choosing our pressing production line, the customer could increase the production ,save energy and reduce cost.


The cold press machine is the main equipment during plywood production line, that pre-presses the glued veneer for a short time to make it preliminarily formed, and then sends it to the hot press for pressing. The step helps to make the plywood to a basic thickness in advance, shorten the hot pressing cycle and improve the panel quality.

 

 

The plywood cold press machine comprises a feeding mechanism, a frame, press plates, plunger cylinder, lifting cylinder, hydraulic station etc. The frame part adopts a combined structure, and it is convenient for transportation.

The blank board is transported to the worktable of the cold press after assembly. Start the pump pressure then the cylinder will drop. Start pressure when the movable plate touches the blank board. The time is 20-45 minutes. Then some bonding strength of blank board will appear.

 

Weihai BaiShengYuan Industry est un fabricant de machines à bois depuis 1956.

La gamme de produits BSY se concentre sur une gamme de machines de contreplaqué standard et spéciales qui comprend une usine de contreplaqué, une écorceuse de grumes, un tour rotatif monobroche de placage, un tour rotatif sans broche de placage, un tour rotatif combiné, un chargeur de bûches, un convoyeur de bûches, une guillotine de placage, des performances de contreplaqué presse, séchoir à placage, coupe-bordure de contreplaqué, ponceuse de contreplaqué, etc.

With the support from the Technology Development Center and all the efforts contributed by the engineers, the Group has successfully developed the most advanced plywood production line in China. Such production line has been set up in several countries, including Romania, Turkey, Russia, Indonesia, Malaysia, India, Bangladesh, Chile, Argentia etc.