胶合板冷压机 It’s a necessary equipment for processing plywood, suitable for 3’*7’,4’*8’ panel. By choosing our pressing production line, the customer could increase the production ,save energy and reduce cost.

The cold press machine is the main equipment during plywood production line, that pre-presses the glued veneer for a short time to make it preliminarily formed, and then sends it to the hot press for pressing. The step helps to make the plywood to a basic thickness in advance, shorten the hot pressing cycle and improve the panel quality.

The plywood cold press machine comprises a feeding mechanism, a frame, press plates, plunger cylinder, lifting cylinder, hydraulic station etc. The frame part adopts a combined structure, and it is convenient for transportation.

The blank board is transported to the worktable of the cold press after assembly. Start the pump pressure then the cylinder will drop. Start pressure when the movable plate touches the blank board. The time is 20-45 minutes. Then some bonding strength of blank board will appear.

威海市百盛源实业有限公司始创于1956年，是一家木工机械制造商。

BSY产品线以一系列标准和特殊的胶合板机器为中心，包括胶合板厂、原木剥皮机、单板单轴旋转车床、单板无主轴旋转车床、组合旋转车床、原木充电器、原木输送机、单板断头台、胶合板表演压力机、单板干燥机、胶合板修边机、胶合板砂光机等。

With the support from the Technology Development Center and all the efforts contributed by the engineers, the Group has successfully developed the most advanced plywood production line in China. Such production line has been set up in several countries, including Romania, Turkey, Russia, Indonesia, Malaysia, India, Bangladesh, Chile, Argentia etc.